1. <acronym id="12v62"><sup id="12v62"></sup></acronym>

  2.   熱門關鍵詞:
    17D4變速箱殼體加工工藝制訂與取力窗口面螺紋底孔專用鉆床設計
    • 該文件為docx格式
    • 文件大小:14.48 KB
    • 下載次數
    • 文件評級
    • 更新時間:2022-01-27
    • 發 布 人宋吉利123
    • 文件下載:
    • 立即下載

    • 文件介紹:
    • 該文件為 docx 格式,下載需要 10 積分
    • 17D4變速箱殼體加工工藝制訂與取力窗口面螺紋底孔專用鉆床設計摘 要
      17D4-00030-B變速箱是東風系列EQ6100汽車的基礎零件之一。它把變速箱中的軸和齒輪等有關零件和機構聯結為一個整體,使這些零件和機構保持正確的相對位置,以便其上各個機構和零件能正確、協調一致地工作。變速箱的加工質量直接影響變速箱的裝配質量,進而影響汽車的使用性能和壽命。
      專用機床一般采用多軸、多刀、多工序、多面或多工位同時加工的方式,生產效率比通用機床高幾倍至幾十倍。由于通用部件已經標準化和系列化,可根據需要靈活配置,能縮短設計和制造周期。因此專用機床兼有低成本和高效率的優點,在大批、大量生產中得到廣泛應用,并可用以組成自動生產線。專用機床一般用于加工箱體類或特殊形狀的零件。加工時,工件一般不旋轉,由刀具的旋轉運動和刀具與工件的相對進給運動,來實現鉆孔、擴孔、锪孔、鉸孔、鏜孔、銑削平面、切削內外螺紋以及加工外圓和端面等。有的組合機床采用車削頭夾持工件使之旋轉,由刀具作進給運動,也可實現某些回轉體類零件(如飛輪、汽車后橋半軸等)的外圓和端面加工。

      關鍵詞:加工工藝制訂 組合機床主軸箱鉆孔


      Abstract
      17D400030B gearbox is one of the basic parts of Dongfeng series EQ6100 car. The relevant parts and mechanism in transmission shaft and gear connected as a whole, make these parts and institutions to maintain the relative position of the right, so that it can correct all agencies and parts, working in harmony. The processing quality of the gearbox directly affects the assembly quality of the gearbox, and then affects the service performance and the service life of the automobile.
      Special machine tools are generally multi axis, multi knife, multi process, multi - or multi station processing at the same time, the production efficiency is higher than the general machine several times to several times. Due to the standardization and serialization of the general components, it can be configured flexibly according to the requirements. Therefore, the special machine tool has the advantages of low cost and high efficiency, and is widely used in a large number of mass production, and can be used to form an automatic production line. Special machine tools are generally used for machining box or special shape parts. When machining the workpiece is generally not rotated by the relative feed motion of the tool rotation and tool and workpiece, to achieve the drilling, reaming, boring, reaming, boring, cutting and milling, and the processing thread and the circle and etc.. There is a combination of rotating tool with clamping workpiece machining head to, by the tool feed motion, also can achieve some of the rotating parts (such as flywheel, car rear axle etc.) of the circle and the process.

      Key words:The processing technology to make Aggregate machine-tool headstock drilling.
      ...
    文檔留言
    驗證碼: 請在右側輸入驗證碼 看不清楚,換一個
    更多..相關文檔
      無相關信息
    精品国产欧美一区二区

      
      

    1. <acronym id="12v62"><sup id="12v62"></sup></acronym>